Customization: | Available |
---|---|
After-sales Service: | Free Technical Guidance |
Principle: | Magnetic Sensors |
Still deciding? Get samples of US$ 80/Piece
Order Sample
|
Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
---|
Payment Methods: |
|
---|---|
Support payments in USD |
Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
---|
Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
---|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Measuring Range | 200~6000mm(>6M customize) |
Resolution Factor | 10mm,5mm,20mm |
Signal Output | 4~20mA(two -line) |
200Ω/m(1/2'', 3/8'') | |
Loading Resistance | 500Ω |
Transmitting | >1000m |
Working Power Supply | 16~30VDC |
Density | ≥0.5g/cm3 |
Pressure | PN2.5~PN160(×0.1MPa)(Max pressure PN320) |
Operating Temperature | -40 ~ 80 °C, ≤120 °C,≤150 °C |
Float Ball Diameter | Ф30~Ф120(depending on pressure and density) |
Flange Installation | DN40~DN150/RF/PL(HG/T20592~2009) customized |
2'' thread (downward install) | |
1/2'' thread (upward install, resistance signal output) | |
3/8'' thread (upward install, resistance signal output) | |
Installation Angle | ≤±25° |
Electrical Connection | M20×1.5 female thread Three-lines screening cable |
IP Grade | IP65 |
Explosion-Proof Grade | Exia II CT6Ga, EXd II CT6Gb |
1 | Installation type | |||||||||||||||||||||||||||
DN/sealing face/flange | 02(down) | 03(up) | 04(up) | K | ||||||||||||||||||||||||
Standard:HG/T 20592,20615-09 | G1/2"thread | G2"thread | G3/8"thread | DIN bayonet-type | ||||||||||||||||||||||||
2 | Nominal pressure (x0.1MPa) | |||||||||||||||||||||||||||
Z | A | B | C | D | E | F | G | H | ||||||||||||||||||||
2.5 | 6 | 10 | 16 | 25 | 40 | 63 | 100 | 160 | ||||||||||||||||||||
Flange standard: when PN≥40, flange≥DN125 | ||||||||||||||||||||||||||||
3 | Tube material | |||||||||||||||||||||||||||
P1-304 | P2-316L | P3-321 | P4-1Cr18Ni9Ti | P5-0Cr18Ni9Ti | P6-00Cr17Ni14Mo2 | |||||||||||||||||||||||
PP | T-Titanium | F-304+PTFE | QF-Poly perfluorovinyl | |||||||||||||||||||||||||
4 | Float ball material | |||||||||||||||||||||||||||
P1-304 | P2-316L | P3-321 | P4-1Cr18Ni9Ti | P5-0Cr18Ni9Ti | P6-00Cr17Ni14Mo2 | |||||||||||||||||||||||
PP | T-Titanium | F-304+PTFE | QF-Poly perfluorovinyl | |||||||||||||||||||||||||
5 | pipe Dia | |||||||||||||||||||||||||||
14 | 16 | 20 | 8 | T | ||||||||||||||||||||||||
14mm(standard) | 16mm | 20mm | 8mm | Special need | ||||||||||||||||||||||||
6 | Medium density | |||||||||||||||||||||||||||
-liquid level measurement-indicate the density (g/cm3 or kg/m3) | ||||||||||||||||||||||||||||
/ -interface measurement-indicate the density of 2 kinds of medium(g/cm3 or kg/m3) | ||||||||||||||||||||||||||||
7 | Operating temperature | |||||||||||||||||||||||||||
L:≤80ºC | H:≤120ºC | J:≤150ºC(consulting) | ||||||||||||||||||||||||||
8 | Installation depth L/ measuring range M | |||||||||||||||||||||||||||
/ --installation depth/measuring rang M(mm, M=L-L1-X, X=1/2 length of float ball+30) | ||||||||||||||||||||||||||||
Note:Maximum measuring range<=installation depth L-length of float ball-30 | ||||||||||||||||||||||||||||
9 | Resolution | |||||||||||||||||||||||||||
B10:10mm(normal) | B5:5mm | B20:20mm | T: special requirement | |||||||||||||||||||||||||
10 | Signal output | |||||||||||||||||||||||||||
A | B | C | D | |||||||||||||||||||||||||
4~20mA | 4~20mA with HART | 0~20mA | 0~10mA | |||||||||||||||||||||||||
11 | Indicator | |||||||||||||||||||||||||||
No mark:N/A | M1:Needle meter | M2:LED | M3:LCD(HART) | |||||||||||||||||||||||||
12 | Explosion - proof | |||||||||||||||||||||||||||
No mark:N/A | i:Exia II CT6Ga | e:Exd II CT6Gb |