Customization: | Available |
---|---|
After-sales Service: | 1 Year |
Principle: | Magnetic Sensors |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
High Pressure Automatic High Temperatur Reliable Float Level Switch
1. 23 years of instrumentation equipment production experience.
2. Product support OEM / ODM, export to more than 100 countries.
3. The company area 20,000 square meters, and 150+ orders per month 4. Provide email, skype, whatsapp 24-hour one-on-one technical support service online.
Working principle
The UHK magnetic float level switch consists of a reed switch and a magnetic float. It is based on the buoyancy principle, using a floating ball with a magnetic component to drive the reed switch to open or close at each corresponding position in the measuring tube with the liquid level lifting, thereby realizing the detection and control of the position of the liquid level.
The UHK magnetic float switch can be configured with up to 8 switches for 8-point detection. The magnetic float level switch operates without direct contact with the measured medium, the contacts are not mechanically worn, and can operate without an external power supply.
The UHK magnetic float switch can be configured with up to 8 switches for 8-point detection. The magnetic float level switch operates without direct contact with the measured medium, the contacts are not mechanically worn, and can operate without an external power supply.
Switch point type: | AO -- Normally open (250VAC 0.5A 20W ) SPST |
AC -- Normally closed (250VAC 0.5A 20W ) SPST | |
C -- Conversion type (250VAC 1.0A 60W) SPDT | |
Note: Voltage, current, power parameters are the maximum value. The switching voltage, switching current should not surpass switch wattage restriction. | |
Maximum switch frequency | <=1*109 |
Switch error | <=±8±2mm |
Min space between switches | 50mm(customize while space is less than 50mm) |
Transmitting distance | >2000m |
Working power supply | No need of external power supply |
Medium density | >=0.5g/cm3 |
Working pressure | PN2.5~ PN160(Special for PN320) |
Working temperature | -40~80 ºC, -40~120 ºC, -40~150 ºC (others for customize ) |
Float diameter | Ф30~Ф120(depending on pressure and density) |
Installation type | Flange: DN50~DN150 HG/T20592~2009 |
1-1/2'', 2'' external thread (downward install type) | |
1/2'' external thread (upward install type) | |
3/8'' external thread (upward install type) | |
Installation angle | <=±25° |
Electric interface | M20×1.5 female thread |
IP grade | IP65\IP67 |
Explosion-proof grade | Exia II CT6Ga or Exd II CT6Gb |