| Type: | Rotary Paddle Level Switch |
|---|---|
| Principle: | Rotary Paddle |
| Wires: | Customization |
| Samples: |
AMB,ATM,100mm,carton box
|
|---|
| Customization: |
|---|
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
| Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Suppliers with verified business licenses
Audited Supplier
Vacorda factory Rotary Paddle Level Switch is a level switch for solid materials (including powder, block, granular, gel, etc.) poijnt level detection.
The motor drives the blade to rotate slowly. When the measured medium reaches the blade position, the blade is blocked and stops rotating, thereby triggering the micro switch to output the switch signal. When the measured medium descends away from the blade, the blade returns to the original position and continues to rotate under the action of the spring. The tension of the spring can be adjusted according to the specific gravity of the measured medium, and the spring with the material ratio is adjusted to the strongest, and vice versa.
The rotary paddle level switch has been widely used in the chemical, plastic, cement, pharmaceutical, feed, food and other industries.
1. With overload protection to prevent motor damage
2. Good sealing performance, strong overload capability and large output contact capacity.
3. The torque is stable and adjustable. According to the different specific gravity, the sensitivity of the switch can be adjusted by adjusting the tension of the spring.
4. Special design blades can be used for low density materials
| Detection method: | rotation paddle resistance point level detection |
| Torque: | 1.0 kg * cm |
| Material specific gravity: | ≥0.5g/cm3 |
| Insulation resistance: | ≥100MΩ |
| Working temperature: | -10~+80ºC (Max 400ºC) or customization |
| Dielectric strength: | 1500V/1min |
| Protection level: | IP65 |
| Blade material: | 304, 316L |
| Working power: | 220/110VAC, 24VDC |
| Power consumption: | 4 W |
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}