Customization: | Available |
---|---|
Type: | Infrared Sensor Switch |
Principle: | Infrared |
Still deciding? Get samples of US$ 88/Piece
Order Sample
|
Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
---|
Payment Methods: |
|
---|---|
Support payments in USD |
Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
---|
Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
---|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Water Tank and Diesel Fuel Tank Magnetic Float Ball Level Switch
Product features
1, long life span, stable and reliable operation, easy installation, almost no maintenance
2, none influence of measured medium in physical and chemical state. Eg: medium electrical conductivity, dielectric constants, foam, pressure, temperature, evaporation, boiling, bubbling effect etc, .
3, choose appropriate material can be used in a variety of bad media environment with densities ≥ 0.5G/CC ;
4,-interface measurement with two media of different density control;
5,wide range of application. Pressures from vacuum to PN160 (special up to PN320), temperature -40~+150 ° c;
6,design, explosion-proof, suitable for explosive environments;
7,UHKG controller can be used to control the upper and lower liquid level.
Operation:
Two control method of one magnetic float level gauge:
1,the upper limit-users select the normally open contact connection: the machine starts when the liquid level reaches the controlled upper limit and the node closes.
When the liquid level reaches the controlled lower limit and the node opens, the machine stops. (eg. When the liquid flows out the pump);
2,the lower limit-users select the normally closed contact connection: the machines starts when the liquid level reaches the controlled lower limit and the node closes.
When the liquid level reaches the controlled upper limit and the node closes, the machine stops. (eg. When the liquid flows in the pump);
Technical Data:
Max insert depth |
L=6m(>6m customize) |
Max control scope |
L-120mm |
Min control scope |
50mm(<50mm customize) |
Medium density |
>0.5g/cm3 |
Working pressure |
PN2.5~ PN160(Max pressure PN320) |
Working temperature |
-40~80 °C, -40~120 °C, -40~150 °C (250°C customize ) |
Float diameter |
D28~D120(depending on pressure and density) |
Installation type |
Flange: DN40~DN150 |
Flange standard: HG/T20592~2009 |
|
(pressure>PN25, Flange>DN125) |
|
G2'' thread |
|
Other method (consulting) |
|
Maximum switch frequency |
<1×105 |
Inaccuracy |
±8±2mm |
Working power supply |
220VAC/380VAC |
Max voltage of switch |
<250VAC |
Max current of switch |
5A |
Installation angle |
< ±25° |
Wiring box |
M20×1.5 female thread |
IP grade |
IP65 |
Explosion-proof grade |
Exd II CT6Gb |