Working Principle
ZX rotary paddle level switch is a level controller for solid materials (including powder, block, granular, gel, etc.). The motor drives the blade to rotate. When the measured medium reaches the blade position, the blade is blocked and stops rotating, thereby triggering the micro switch to output the switch signal. When the measured medium descends away from the blade, the blade returns to the original position and continues to rotate under the action of the spring. The tension of the spring can be adjusted according to the specific gravity of the measured medium, and the spring with the material ratio is adjusted to the strongest, and vice versa.
The rotary paddle level switch has been widely used in the chemical, plastic, cement, pharmaceutical, feed, food and other industries.
Features
- With overload protection to prevent motor damage
- Good sealing performance, strong overload capability and large output contact capacity.
- The torque is stable and adjustable. According to the different specific gravity, the sensitivity of the switch can be adjusted by adjusting the tension of the spring.
- Special design blades can be used for low density materials
Dimensions
 |
|
| bushing type |
Adjustable type |
high temperature bushing type |
high temperature adjustable type |
Technical Parameters
Detection method: rotation blade resistance detection
Blade speed: 1RPM (rev / min)
Torque: 1.0 kg * cm
Contact capacity: 1*SPDT 250VAC/10A
Material specific gravity: ≥0.5g/cm3
Insulation resistance: ≥100MΩ
Working temperature: -10~ +80ºC (Max 400ºC)
Dielectric strength: 1500V/1min
Protection level: IP65
Blade material: 304, 316L
Working power: 220VAC, 110VAC, 24VDC
Power consumption: 4 W
Scope of application
Powder warehouse, storage tank, power industry in various industries: coal transportation, ash removal system (ash bucket, warehouse pump, ash warehouse). Such as: cement plant, flour cans, packaging hoppers, various raw material silos, batching mixing tanks, wood chip bins, liquid tanks, etc.
|
|
| Standard Thread Type |
Standard Flange Type |
Type A Type B Type C Type D |
Selection
ZX - 1 2 3 4 5 6
Code
| 1 |
Link form code |
| |
1-Standard |
2-Sleeve Type |
3-Adjustable Type |
| 4-Steel Rope Type |
5-User Requirements |
|
| 2 |
Installation method code (thread, flange should indicate the specific specifications) |
| |
S-Threaded(G1") |
F-Flange(DN65 PN0.6) |
X-User Requirements |
| 3 |
Blade form code |
| |
A-A type |
B-B type |
| C-C type |
D-D type |
| 4 |
Working power code |
| |
A-220VAC |
B-110VAC |
C-24VAC |
D-24VDC |
| 5 |
Insert depth Code |
| |
Write the insertion depth value directly in mm |
| 6 |
Insert depth Code |
| |
Without mark-≤80ºC |
G-special high temperature |
Audited Supplier 
){kind=link}