Contact Form: | Form A |
---|---|
Contact Material: | Mercury |
Size: | Medium |
Samples: |
---|
Customization: |
---|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
---|
Payment Method: | |
---|---|
Initial Payment Full Payment |
Currency: | US$ |
---|
Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
---|
Suppliers with verified business licenses
1.Anti-adhesion: unique circuit design and sensor structure can eliminate the influence of the measurement of the material on the probe, and automatically correct it, avoiding false measurements and signals, and no need to clean the probes regularly;
2.Maintenance-free: The switch can be moved by mistake, no mechanical wear, no maintenance required;
3.Strong anti-interference: contact measurement, 0.3 second delay can eliminate the influence of material fluctuation;
4.Strong adaptability: can detect powder, particles, liquid, viscous, conductive, non-conductive materials.
Product Parameters
Probe material |
SS304, SS316L, etc. |
Probe pressure |
Max 5.0MPa |
Sensitivity |
0.5PF; |
Material temperature |
-184 ~ 350 ºC |
Switching delay |
The delay range is adjustable from 0 to 30 seconds; |
Mounting interface |
1"NPT, 3/4" NPT or customer flange |
Electrical interface |
M20*1.5, 1/2 "NPT |
Working power |
220VAC, 24VDC; |
Alarm form |
optional upper or lower limit alarm; |
Output signal |
Relay output |
Contact form |
SPDT (1 SPDT); |
Contact capacity |
220VAC 5A; |
Power consumption |
2.5W max; |
Ambient temperature |
-40 ~ 80 ºC; |
Protection level |
IP65; |
Explosion-proof grade |
ExiaCT5Ga, ExidCT5Gb |
FAQ
Q: The new magnetic flap liquid level gauge can't show liquid level?
A: 1.check whether there is block in by pass pipe 2.check the the density of medium 3.check whether the float ball is stucked by float ball.
Q: The longest length of magnetic flap liquide level gauge?
A: the length is customized,but in order to be convenient for transport,if the length is over 6m,we recommend
Q: If the float ball is installed at the wrong opposite direction,what's the influence?
A: reading level will be higher than true level,usually higher by length of floatball-70mm
Q: What's installation details of magnetic flap liquid level gauge ?
A: 1.before installation,check specification with label plate. 2.There shouldn't magnetic field within 400m
Q: There is problem in output signal 4--20mA?
A: 1.Check working power supply 2.check wiring 3,check load resistance 4.verify measuring range,zero point
Q: what's specification we need to know before purchasing magnetic flap liquid level gauge?
A: medium density,working temperature,working pressure,material,flange center to center distance,flange standard,whether need 4--20mA output signal;wether need level alarm
Suppliers with verified business licenses